How to Change Your Oil Without a Jack

This post may contain affiliate links. As an Amazon Associate we earn from qualifying purchases.

There are four ways to change your oil on your own without a car jack. Most cars have an emergency jack, but if you have nothing but time, can you still change your oil with no jack at all?

While this method takes about 30 minutes, it is acceptable in case you are stranded without access to a shop. One way involves lining up one tire on a curb, which raises the car off the ground.

How to Change Your Oil Without a Jack

Rhino Ramp

To change oil without a jack, you’ll need a special tool, such as a Rhino Ramp. You’ll also need a 14mm crush gasket, which can be purchased for as little as 20 cents, though shipping can be expensive. Regardless, you’ll need to warm up your car before attempting this task. Make sure you’re working on a level surface, too. Once the car is warmed up, remove the oil filter and drain plug. If your car is too low for that, you’ll have to use an expensive jack.

The Rhino Ramp uses a patented polymer internal support system, a division that helps to stabilize your vehicle and provide more height for your change. Although the plastic ramp feels sturdy, it doesn’t feel as sturdy as steel. Some people have had problems with metal Rhino Ramps, though. To make your life easier, consider purchasing a jack stand. This will allow you to raise your car off the ground, and make changing the oil a hassle-free process.

While car jacks are safer than a Rhino Ramp, they’re still heavy. RhinoGear’s Rhino Ramp for changing oil without a jack promises heavy-duty strength without the weight. With a GVW of 12,000 pounds, this product can be used to change the oil and perform other car maintenance tasks safely. And it comes with a convenient carrying case.

Although the Rhino Ramp is a great product for changing the oil without a jack, its design isn’t perfect for every job. For example, most car repairs can’t be completed without removing the wheels, so this device is not ideal for all work. Unfortunately, car dealers make it difficult for a non-jacketed car to work on the engine, as it is part of a safety measure for accidents.

The benefits of a Rhino Ramp for changing oil without using a jack are numerous. A Rhino Ramp provides a safe, stable surface to raise the vehicle and access the oil pan. With a ramp, you can change the oil without the hassle of a jack. This car ramp also prevents back pain and muscle strains. If you aren’t confident enough to lift a car, consider investing in a car ramp.

Filter wrench

When changing oil on a vehicle, an oil filter wrench is a great tool to have. While the wrench can help you to change your oil without a jack, it’s also handy to have on hand when you’re working on a new car. Volkswagen, for example, uses oil filters that look like hex-head bolts, which means you’ll need a large end-cap-style socket. The traditional strap-type filter wrench won’t fit.

Oil change tools include a cap-on-oil filter wrench and a torque wrench. While some drivers may think they need to lift the vehicle for this process, a torque wrench allows them to get the job done without a jack. Make sure to bring a replacement oil filter along with the wrench. The filter wrench is also useful for replacing the oil filter in cars. Before changing the oil, be sure to check the brake pads.

An oil filter wrench is a handy tool that engages the serrations on the end of the oil filter. The wrench is widely available at auto parts stores and can easily be matched to the type of oil filter you need to replace. You can find these tools in many sizes at a few dollars each. Just make sure to choose the right size for your vehicle. A band-type wrench may be easier to use, but you’ll end up getting a dirty rag as you try to remove it.

After getting the filter out, you’ll need to remove the old oil filter. A proper oil filter wrench is essential to remove the old filter, and a new one can be easily placed on top. If your car uses a cartridge-style oil filter, you’ll need an oil filter wrench that fits the top of the car. These wrenches are available at auto parts stores and most major retail chains.

A jack is essential for this step, but a jack stand is also helpful. Be sure to place the jack stand under a structural brace. The jack stand will help support your car. Make sure your car is stable and level before attempting to change the oil. Remember that a dirty engine is not only unattractive, but can also cause your car to overheat.

Changing oil without a jack

Changing oil without a jack is possible, but only if you’re comfortable bending over and crawling underneath the car. Most modern cars are equipped with an emergency jack, so you don’t need to purchase one. Depending on your car’s weight, however, a roadside jack may not be sufficient. You should be sure to secure your car on a jack stand or jack ramp to prevent it from falling.

There are many ways to change oil without a jack, but the most common is to install a low-profile bumper ramp. These ramps are relatively cheap, but will only provide a couple of inches of clearance. Another solution involves driving your front wheels up onto a large block of wood. This will provide more clearance for your arms to reach under the car. Changing oil without a jack is also possible without a jack stand, but you’ll need a few tools and some practice.

If you’re not comfortable lifting your car, you may be able to use a jack stand. First, set up the stand on the frame of your car. Make sure the stand is securely in place before climbing under the car. It is also a good idea to wear latex gloves to protect your hands from the chemicals that are found in motor oil. The last thing you want to do is hurt yourself while changing your oil.

If you don’t have a jack, you can still raise your car to a higher level by using two jack stands. These will raise the car about 3 inches above the ground. Once you’ve gotten your car up and standing, use a screwdriver to unscrew the lug nuts. Alternatively, you can use a large U-shaped metal to wedge between the car and a wall, and then push down on the metal.

Changing the oil filter is a relatively simple job, as long as you have enough space to reach under your car and slide the pan underneath. You can also purchase inexpensive car tire ramps from Amazon, although these won’t work on most cars. Changing the oil in your car can be a stressful experience, so make sure you have a good plan in advance. And remember: if you’re not able to find a jack stand, you can always rent one.

Quick & Easy oil change

If you don’t have a jack, you can still change your oil in your car by using a low profile bumper ramp. These ramps are close to the ground and give you a few inches of clearance. You can also raise the car by driving one of its front wheels up onto a block of wood. These tools are cheap and you won’t need a jack. The results will be high quality products.

Before you start changing the oil, read the manual of your vehicle and follow the recommended viscosity. Then spread out a plastic sheet on the ground and toss it afterward. Set up the jack stands and jack up the car. Place the plywood under the jack stands so that the car is stable while you change the oil. Once the car is on the jack stands, follow the steps in the video to make the process easier.

After removing the hood, remove the oil drain plug. There is a large nut or plug under the oil pan that you can unscrew with an adjustable wrench. Next, use a funnel to fill the engine with the manufacturer’s recommended oil volume. To install or remove the rubber plug, you must unscrew the large nut or plug underneath the oil pan. After that, carefully remove the cap and put the oil filter into the oil.

Next, make sure the oil level on the car is at its proper level. If the car has a dipstick, check the level with the dipstick. If you see an oil slick, wipe the oil on the dipstick with a paper towel. If you are sure that the oil level is correct, lower the car down to the ground. When you are finished, you can check the oil level by using the dipstick.

To change your oil without a jack, you need to remove the drain plug. The plug should hold about five quarts of oil. After you remove the plug, you can either let the oil drain into the pan or let it drop into the oil. Either way, you’ll need to fish out the plug later on. Wear chemical-resistant gloves to prevent any possible skin reactions. If you’re not sure how to do it, you can consult a professional.

Harold R

Hello, I'm Harold the owner of Thanks for reading today.

Recent Posts